Blues Renewables
Get a quote

Solar Panel Installation in Siruseri

We establish who controls the roof before anything gets designed

Siruseri is an IT SEZ, and that makes the roof question unusually complicated. Buildings are large, roofs are substantial, and the company occupying the floor is very often not the party that controls the terrace above it.

Installing across Chennai since 2020

Two years free maintenance included

Subsidy and TANGEDCO paperwork filed by us

Free site survey and energy audit, no obligation

Free, no obligation

Get your figure for Siruseri

1 working day

We will call you within one working day with a figure. No site visit is needed for that; the survey only happens if you want to go ahead. Your number stays with us and is never sold.

The short answer

Looking for a solar panel installation company in Siruseri?

Most enquiries from Siruseri are commercial, where the tariff category and sanctioned demand decide the system long before the roof does. Because it is a newer area, roofs here are generally in good condition and the paperwork moves faster than the average. Installing across Chennai since 2020, we file the PM Surya Ghar application worth up to ₹78,000 for households, handle TANGEDCO net metering end to end, and cover two years of maintenance after commissioning. Before the survey, you can check the solar panel price in Chennai for 3 kW to 10 kW systems and see how our solar panel installation in Chennai works, the same process we follow in Siruseri.

Solar panels being fixed to a rooftop mounting structure in Siruseri, Chennai
Panels going onto an elevated structure in Siruseri.

What it costs here

A typical 5 kW system in Siruseri

Solar panels laid on a white tiled terrace roof in Siruseri

Standard 5 kW example

What a typical 5 kW home system does here. Commercial and industrial connections are quoted differently and do not receive the subsidy.

System size5 kW, about 9 panels
Roof area usedabout 250 sq ft, shade-free
Generationabout 22 units a day
Bill beforeabout ₹9,000 per bi-monthly cycle
Bill afterAbout ₹500 to ₹1,100, mostly the network charge
Cost after subsidyabout ₹2.20 lakh after both subsidies

Not sure what your site can carry?

Send us your last electricity bill on WhatsApp and we will come back with an indicative system size and what it would offset. No visit needed for that first answer.

The local picture

Campus buildings and who controls the roof

Siruseri’s IT park and SEZ buildings are typically developer-owned and let to occupying companies, sometimes floor by floor. That means the tenant with the electricity bill frequently has no rights over the roof, while the party that controls the roof does not pay the electricity bill. Resolving that split is the first step in any Siruseri commercial solar project.

The three parties and what each needs

The occupying company

Pays the electricity bill and wants the saving, but usually cannot install without the building owner’s agreement.

The building owner or developer

Controls the roof but may not benefit directly from a reduced tenant bill unless the arrangement is structured for it.

The park or SEZ administration

May have its own requirements on structures, appearance and electrical alterations.

Structures that work in this situation

Owner-led installation with the benefit passed through the lease

Usually the cleanest arrangement in a multi-tenant building.

An OPEX or RESCO structure

Where a developer funds and owns the system, which can align to lease terms more comfortably than tenant ownership.

Single-tenant buildings

Where the occupier holds the whole building and the position is simpler.

The technical picture on IT park roofs

Usable area is well below gross

Chillers, air handling units, condenser banks and lift machine rooms occupy space, cast shade and need maintenance access preserved around each. We measure usable area rather than working from a floor plate figure.

The load profile is favourable, with two caveats

Demand charges and net feed-in

Office consumption sits squarely in working hours, close to an ideal solar match, and commercial tariffs make each displaced unit worth more. But solar does not reduce demand charges, which on a large commercial connection remain substantial, and non-domestic consumers are generally on net feed-in rather than net metering.

Areas we cover around Siruseri: SIPCOT IT Park Siruseri, Navalur approach, Egattur, Kelambakkam border, Thalambur, the OMR SEZ stretch.

All areas we cover in Chengalpattu →

Residential

Solar for Siruseri homes

Residential development around Siruseri is largely gated communities serving the IT workforce.

Gated community villas

With individual connections, typically installing 3 kW to 6 kW.

Apartment associations

Follow the common-area route at ₹18,000 per kW.

Newer construction

Means sound structure and generally adequate sanctioned load.

Get a free roof survey →

Commercial and industrial

Solar for Siruseri businesses

IT parks and SEZ buildings

The core market, subject to the roof rights position above.

Single-tenant campuses

Where the occupier controls the building and the project is considerably simpler.

Support services

On the park, including food service and facilities operations.

Warehousing and logistics

On the approaches, where roof area often exceeds what the load justifies.

Request an energy audit →

Local guide

Solar in Siruseri: SIPCOT campuses and the townships beside them

SIPCOT's IT park at Siruseri covers about 780 acres, and its campuses draw power in megavolt-amperes with diesel backup to match. That scale, and the large apartment townships built beside the park for its workforce, set the solar questions here.

Pincode603103
DistrictChengalpattu district, Thiruporur taluk
SIPCOT IT ParkAbout 780 acres, on Old Mahabalipuram Road between Navalur and Kelambakkam
Typical buildingsIT campuses and data centres; high-rise townships such as L&T Eden Park (92 acres)
Official yield1,580 units per kW a year (Chengalpattu district)

Campus loads measured in MVA, with diesel standing by

The environmental filing for the expansion of TCS's Siruseri campus gives a sense of scale: 20 MVA of supply from the grid in operation, 14 diesel generators of 2,000 kVA each on standby, and about 25,200 people a day once expanded. A rooftop array on a campus like this offsets a slice of the daytime load, and larger shares come from captive or open access supply. The design point specific to these sites is the generators. When the grid fails and the DG sets start, a rooftop inverter on the same bus must not push power back into them. A campus array here needs a DG synchronisation or zero-export controller that throttles the inverters during DG operation, specified at the design stage.

Townships next to the park: check the metering first

Residential growth around Siruseri has largely been large townships for the IT workforce. L&T Eden Park spreads over 92 acres beside the park, with high-rise towers and its own substation for the township. For associations in towers like these, the common-area route at ₹18,000 per kW covers lifts, pumps, the STP and lighting, but the roof of a tall tower is small against what it serves. Before anything is designed, confirm how the common areas are billed: on an LT service of their own, or through the township's own substation arrangement. That decides which metering route a common-area system can take. Villa owners with individual connections follow the household route; a 5 kW system costs about ₹3,20,000, about ₹2,20,000 after both subsidies, and makes about 7,900 units a year here.

OMR drainage and where the electrical rooms sit

The Siruseri stretch sits on a corridor with a known drainage problem. After Cyclone Michaung in December 2023, the Times of India reported that OMR is low-lying, that the 20 km of highway stormwater drains laid in 2008 were inadequate for today's run-off, and that ground floors flooded in Thoraipakkam, Sholinganallur, Karapakkam and Perungudi further north. For a campus or township array, that argues for keeping string inverters and combiner boxes on the roof or on an upper plant floor, not in basement or ground-floor electrical rooms, and for routing the AC cable down risers rather than through ground-level ducts that can fill with water.

What we install

What we install in Siruseri

The process

How installation works

1

Free site survey

Shade-free roof area measured across the day, structure checked, connection name and sanctioned load confirmed.

2

Design and itemised quotation

Sized against twelve months of consumption, with every component named.

3

Approvals filed

PM Surya Ghar and TANGEDCO net metering, plus load enhancement or phase conversion in parallel where needed.

4

Installation

One to three days for a residential system, carried out by our own team rather than subcontracted.

5

Inspection and commissioning

TANGEDCO inspects, the net meter goes in, the system goes live.

6

Subsidy tracked to your account

And two years of maintenance included from commissioning.

We check the name on your electricity connection at the survey, because a mismatch stops more applications than any technical issue. See what to keep ready.

Free, no obligation

What will it cost on your roof in Siruseri?

Leasing a floor in a park building?

Then the roof is probably not yours, and that is the first thing to settle. A short call saves a wasted survey.

What happens after you send your details

  1. We call you within one working day, and an engineer rather than a salesperson attends the site.
  2. The survey is free. We measure usable area and shading, check your connection and sanctioned load, and photograph the site.
  3. You get an itemised quotation naming every component and brand, with the subsidy or depreciation position set out.
  4. No obligation at any point. If solar does not make sense for your property, we will say so.

We will call you within one working day with a figure. No site visit is needed for that; the survey only happens if you want to go ahead. Your number stays with us and is never sold.

Common questions

Solar in Siruseri, common questions

Can a tenant install solar on an IT park building in Siruseri?

Not without the building owner’s agreement. Park and SEZ buildings are typically developer-owned and let floor by floor, so the company paying the electricity bill frequently has no rights over the roof. The workable routes are an owner-led installation with the benefit passed through the lease, or an OPEX arrangement where a developer owns the system.

How much usable roof does an IT park building have?

Considerably less than the gross area suggests. Chillers, condenser banks, air handling units and lift machine rooms occupy space, cast shade and need maintenance access preserved around them. We measure usable area rather than working from a floor plate figure.

Will solar remove our office electricity bill?

No. Solar reduces the energy charge on units generated during working hours, which for an office is a substantial share since consumption matches generation well. It does not reliably reduce demand charges, which are levied on sanctioned or recorded maximum demand, and non-domestic consumers are generally on net feed-in rather than one-for-one net metering.

How long does installation take in Siruseri?

Eight to fourteen weeks for a commercial property in Siruseri, compared with six to ten for a house. The approval path is longer for non-domestic connections, and installation is scheduled around trading hours.

Do you handle the subsidy and TANGEDCO paperwork?

For homes, yes. For the commercial connections common in Siruseri, there is no PM Surya Ghar subsidy, so what we file is the TANGEDCO net metering or net billing application, and we supply the invoice and commissioning documents needed for accelerated depreciation and GST input credit.

What is included after installation?

Two years of free maintenance from commissioning, covering panel cleaning, annual inspection of connections and structure, generation monitoring and warranty coordination with the manufacturer.

Our campus has large DG sets. What happens to the solar plant when the grid fails?

Without a controller, the inverters would try to keep feeding the building while the DG sets run, which can push reverse power into the generators. A DG synchronisation controller reduces or stops solar output whenever the DG is on. It should be part of the design from the start, not added later.

Does Siruseri get the same solar generation as Chennai city?

Almost. The state rooftop calculator gives Chengalpattu district 1,580 units per kW a year against 1,600 for Chennai, a difference of about one percent. A 3 kW home system here makes about 4,740 units a year.

Long tail coverage

Areas we cover around Siruseri

SIPCOT IT Park SiruseriNavalur approachEgatturKelambakkam borderThalamburthe OMR SEZ stretch

Not listed? We survey across Chennai and the surrounding districts. Call and we will tell you straight away whether we can reach your site this week.